PD25/PD50/PD75 Butt welder

Resistance butt welding is a method that compacts two workpiece end, uses the resistance heat,until plastic state, then adds the forge force quickly (or does not add forge force,but only maintains welding pressure), completes the welding at last. the welding process is simple, puts away the workpiece, then steps on the switch with foot, the welding efficiency is high.after welding, the attaches are smooth. The burr is small. The structural design is exquisite, easy to adjust to the workpiece welding which with differnent thickness: The special butt welder control circuit, guarantees the welding quality.

Mainly uses in the butt welding.of the small section ( smaller than 250mm2) and the metal molding (for example iron wire, tubing and so on)
main technical parameter of the equipment.

Specification type	PD25	PD50	PD75
Rating capability	25KVA	50KVA	75KVA
input voltage	380V/50HZ
Maximum short circuit current	12000A	19000A	23500A
welding ability (stainless steel)	1.0+1.0mm	2.0+2.0mm	3.5+3.5 mm
electrode stroke	30mm	30mm	30mm
electrode arm protrude length	200 mm	200mm	500mm
Clamp force	1000N~2050N	1500N~3900N	2000N~6000N
Maximum forge force	1000	1500	2500
Weight	300Kg	350Kg	400Kg