PT1080Q Storing spot welder

PT1080Q storing spot welder changes the traditional AC contacter discharge way, uses the silicon-controlled rectifier to discharge, reduces the noise, lengthens the life, safe and reliable. The entire welding sequence uses the MPU chip to control, the control is precise and reliable.
PT1080Q storing spot welder may widely apply in professions such as electron, electricity vacuum, electricity, hardware, semiconductor, battery and so on. May use in the spot welding, replace the electrode and the mold, also may use in each kind of seal welding.

Major technique parameter
1. maximum storing capacity: 8000J
2. electric power supply: 2 50HZ 380V + zero line
3.maximum storing voltage: 380V
4. secondary maximum short-circuit current: 2 Wan Anpei
5. transformer output voltage: ≤6.0V
6. welding ability: Stainless steel: 2.0+2.0mm brass: 1.2+1.2mm
7. electrode pressure: 2450N~5500N
8. electrode woring stroke: 75mm
9. electrode arm spacing: 105~180mm
10. cooling water pressure: ≥0.2Mpa
11. cooling water flux: 6L/min the
12. providing air source: ≥0.5MPa
13. programmed control way: The MPU chip controls
14. weight: Approximately 1000Kg