PT1010Q\PT1012Q\PT1020Q

This series spot welder uses the CPU to control, the fast charging and discharging spot welder of the silicon-controlled rectifier discharges, the welding cycle is short, energy centralizes, can carries on the reliable welding to the non-ferrous metal and the ferrous metal, and the workpiece is not easy to oxidize. Simultaneously may also carry on the seal-cap welding to the transistor and the crystal oscillator. Widely applies in the pole-ear and the pole-mast of the nickel hydrogen square shape power battery's, the welding of the cathode pole-ear and pole-mast of the lithium ion power side battery and the welding in the professions such as flapper, hardware, electronic electric appliance and so on.

Main technical parameter of the equipment

Specification type	PT1010Q	PT1012Q	PT1020Q
Storing capacity	1000J	1200J	2000J
Input voltage	2相  50HZ  380V  + 零线
Welding ability (stainless steel)	1.2+1.2mm	1.4+1.4mm	2.0+2.0 mm
Electrode strok	50mm	50mm	50mm
Electrode arm spacing	50~100mm	50~100mm	50~100mm
Electrode arm protrude length	160mm	160mm	160mm
Electrode pressure	600~2000N	600~2000N	1000~3000N