Amorphous silicon solar panels for drainage of the ultrasonic welding machine

1.the using:
This machine is suitable for welding on palting aluminum glass with the way of ultrasonic roll welds of the entire circle aluminum belt, the aluminum belt is delivering and cutting off automatically. Besides the feeding manually, other movements are completely controlled by PLC automatically.

2.characteristic: high degree of automatization,safe, reliable and simple operation.
Materials collocation:
1) uses Simens PLC (the S7-200 series) to control.
2) uses the Taiwan Taida touching screen, the operation is more direct-viewing and convenient.
3) use the import ball bearing staff and the beeline guide rail
4) uses the import servo electrical machinery, may stepless regulates the speed

3.main technical factor and parameter of the machine
1) elegant appearance, safe and reliable,steady operation, nimble, the noise is smaller than 70 decibels.
2) aluminum belt size: width 5mm; Thickness 0.05-0.15mm; Material plate inner diameter 76.2mm, outer diameter 200mm
3) plating aluminum glass specification: Thickness 3-5mm,Length and width 1250mm×630mm
4) ultrasonic specification: Power <750W, frequency 40KHZ, welds wheel diameter 45mm 
5) worktable size of the weld: 1300mm×650mm
6) external dimensions: Length* width * heigh 2200×1300×700 (mm)
7) control type: PLC controls
8) power supply:        220V/50Hz
9) gas supply:        0.3-0.5MPa